Visit http://www.esab.com/ for more information about our products.

ESAB Copyright.

Caddy® Mig C160i

Print Print

Caddy Mig C160i


Portable MIG/MAG welding unit with built-in wire feeder for 200 mm spools.

Caddy Mig C160i is used for MIG/MAG welding of mild steels for repair, maintenance and assembly work. This easy to use and powerful unit offers excellent welding properties and is easy to take along to the job at hand. Great if you are welding in the workshop or on the move.

With Caddy Mig C160i you only need to set the plate thickness before staring to weld. Hotter or colder welds can easily be obtained by using the heat adjustment knob.

Delivery includes
3 m torch, 3 m mains cable with plug, 4.5 m gas hose with hose clamp and quick connector, return cable with clamp, basic shoulder strap, fitted wear parts in torch/feeder for 0.8 mm wire and instruction manual. 1 kg OK Autrod 12.51, 0.8 mm is also included.


Download PDF

<< Back



  Caddy Mig C160i
External dimensions, LxWxH, mm 449x198x347
Weight, kg 11.4
Enclosure class, protection IP23C
Mains supply, V/Hz 230 +/- 15% / 1ph 50/60
Fuse, slow, A 16
Mains cable, mm2 3x1.5
Max output at 35% duty cycle, A150/20.5 
Max output at 100% duty cycle, A100/19 
Open circuit voltage, V 60
Power factor at max current 0.99
Setting range, A30-160 
Wire feed, m/min 2-11

Ordering information
Caddy Mig C160i, 1ph 230V0349 310 850
1/2 pallet with 6 Caddy Mig C160i0349 312 272
Trolley (for 20 to 50 l gas cylinder)0459 366 887

Visit http://www.esab.com/ for more information about our products.